How to Build a Driving Range: Our Grand Prairie Rebuild
4 minutes to read

To build a driving range, start with the site: parking, tee line space and an outfield big enough that you aren't losing balls every day. Finish permits before construction, hire a general contractor for dirt, concrete and plumbing, then add covered bays and shot tracking. That's how our Grand Prairie rebuild went from abandoned to opening day.
The first time we walked the Grand Prairie site, there was a parking lot, a tiny check-in shack and a huge open field. The range had sat abandoned for years, and the doors were locked when we knocked. That blank canvas is the best place to start if you want to build a driving range, because every decision is still yours to make.
It is also where most of the work hides. Permits, dirt, plumbing and netting all come before the first ball gets hit. Here is how to build a driving range the way we did it, step by step, and what we would tell anyone planning the same thing.
We filmed the whole rebuild, from the first walkthrough to opening day.
And this is how the opneing went.
Plan the site before you touch the dirt
The first two things we checked on that walkthrough were simple. Is there enough parking, and how big is the tee line area? Everything else on a range depends on those two answers, so settle them before you fall in love with the property. If you're weighing an existing course instead of a blank field, here's the checklist we used to buy a golf course.
Design the layout around lost balls
A good golf driving range design layout protects people and protects your inventory. We usually build the tee line in a big V shape so nobody can shank a ball into the bay next to them. A V needs a large outfield, though, and the outfield has to be big enough that you are not losing balls every day.
Trees and low ground cost you money. If part of the range sits in a flood plain, balls disappear into the mud, and replacing them becomes a real line item. Design around those spots from the start instead of paying for them every month.
Budget the time for permits
On a site this blank, we guessed three to four months to open was a standard timeline, and we wondered whether we could beat it. What surprised the non-builders on our team was the permitting. You need a permit for almost everything, so planning and permitting have to be finished before construction can start at all.
Decide what you will build and what you will hire out
Once planning and permits were done, we had a choice to make: build everything ourselves, or bring in a general contractor. We realized quickly that this was not a DIY job. A general contractor handled the heavy building work, and specialist vendors handled the parts they do every week.
The tee line starts underground
Dirt day came first. We brought in a lot of trucks to dig up the tee line about 3 feet down, soil test it, move the dirt back in and pile it up again. Only then could the site be prepped for the tee line concrete, which is the point where a field starts to look like a driving range.
Gutting the existing building
The building already on site had to be completely gutted. When we opened it up, we found problems. The siding was not up to code, so the whole building needed new siding. The plumbing was wrong too, so we dug trenches from outside and ran new piping under the building before framing could start.
That building now holds the kitchen and the bathrooms. We put real effort into the bathrooms on purpose. A porta-potty is still the norm at a lot of ranges, and clean bathrooms are part of making a place somewhere people bring their family.
A new garage for the equipment
We also had to build a second building from scratch: a garage on a new concrete slab with a large garage door. It holds the driving range equipment that keeps the place running, including the picker, the mowers, storage and the ball washer. Foundation work, electrical and insulation all went in before it was ready.
Covered bays and Toptracer turn a field into a range
With the concrete down, we brought in Cover The Tees to build the covered driving range bays. Their aluminum frame covers each bay, which gives golfers shade (and keeps them dry when it rains) and gives us a way to run electrical for the technology and the seating. Work that would have taken us months, they finished in two weeks.
Next came the golf ball tracking technology that makes it a Toptracer driving range. Four cameras along the tee line track every ball hit on the range, so each golfer can see on their monitor exactly where the shot went. That is the moment the site started to feel like a range instead of a construction project. If you are new to the screens, our guide to Toptracer for beginners explains what the trace shows you.
Getting balls from the washer to the golfer
The ball wash station sits in the garage. Balls go into a soaker first, then a washer, then a conveyor that carries them across to the main building. Inside, golfers check in at one of two check-in windows and pick up their balls from the dispenser. Simple to describe, but it is one of the systems a range lives or dies by.
Grass, a putting green and somewhere to sit
The rest of the outdoor space needed new life too. The field was hydroseeded, wet paper mulch mixed with grass seed and sprayed out of a truck with a hose, and we watered it and waited about 30 days for green grass. We added a 5,000 sq ft turf putting green, the first we had ever built, and planned to add more sand to make it roll faster. For the numbers behind a full green, see what our putting green installation took.
The patio got wood posts for string lighting, umbrellas and seating. Most driving ranges do not have a place to sit down after a session. For people who have never played golf, a patio like this makes the range feel welcoming instead of intimidating, and it's what makes the place work when you bring a group. It is part of a wider move toward ranges built around amenities as well as practice.
The final week before opening
The last stretch is mostly small jobs that all have to land at once. New lights went up, the signs arrived, and the landscaping went in around the putting green. The bay dividers arrived late, and we were drilling them into the concrete at every bay the day before opening. Dividers matter more than they look, because they protect new golfers in the next stall.
We also hired and trained the team. A range is only as friendly as the people at the check-in window, so the team trained hard in the last couple of days before we opened, not after.
Opening day
The midday rush surprised us. We had a crowd at noon, a big family crowd at 3pm and almost every bay had kids in it. That was the result we wanted most: a range that families actually use. We had already heard from people who used to hit balls at the old range, and seeing their reaction to the before and after was a big part of the day.
What we would tell anyone planning to build a golf driving range

The biggest lesson from Grand Prairie is that the visible parts of a range, the screens and the covered bays, sit on top of a lot of work nobody sees. Get the layout, the permits and the ground right, and the rest has something solid to stand on. Our covered driving range in Glendale taught the same lesson from a different angle: in Arizona, the shade had to come first. It's the order we follow at all of our golf practice facilities.
Frequently asked questions
How long does it take to build a driving range?
For a blank site like ours in Grand Prairie, three to four months is a standard expectation for getting a range open. Permitting is the part that surprised us most, because almost everything needs one.
Do you need a general contractor to build a driving range?
For us, yes. Dirt work, concrete, plumbing and a new building were too much to DIY, so a general contractor handled the heavy work and specialists handled the covered bays and technology.
What driving range equipment do you need?
At minimum, a picker, mowers, a ball washer and a ball dispenser, plus somewhere secure to store it all. We built a separate garage just for equipment.
How much land do you need to build a driving range?
Enough for parking, a tee line and an outfield big enough that you aren't losing balls every day. We like a V-shaped tee line so nobody shanks a ball into the next bay, and a V needs a large outfield. Steer clear of trees and flood-prone ground.
Are the bays at Golf Ranch Grand Prairie covered?
Yes. All 30 bays at our golf range in Grand Prairie, TX, a short drive from Arlington, sit under the aluminum structure Cover The Tees built, so you get shade from the Texas sun and stay dry when it rains. It's a Toptracer range with a 5,000 sq ft putting green, no reservation needed, and rental clubs if you don't bring your own. Every Golf Ranch location has covered bays.
Want to see what the finished range feels like? Visit Golf Ranch Grand Prairie and grab a free bucket on us, or book a lesson in Grand Prairie and put the bays to work.



.png)